back to homepage	GéKaDé sarl		9, allée de la Fontaine Bourdonnais F-95230 SOISY s/s MONTMORENCY FRANCE info@gekade.com
Gérard Kieft manager			0 139 640 522       +33 139 640 522 0 981 384 333    +33 981 384 333 informations légales (Loi n°2004-575) société GéKaDé SARL au capital de 12 000,00 € Siret 408 679 827 00027    RCS PONTOISE  NAF 4669B N° de TVA (INTRACOM): FR 39 408 679 827 BANQUE:  Crédit Mutuel du Nord 15629 02710 00 064 251 345 / 89 IBAN : FR76 1562 9027 1000 0642 5134 589 SWIFT / BIC : CMCIFR2A

Our company was created in 1996 on demand of a couple of coil winders and suppliers knowing our skill in magnetic research.

DISTRIBUTION: "Aimed to fill some of the gaps left by other distributors"
We started with ARZNER and TransElectro components and appreciate the positive work we've done together in a reducing market.
We added ultra fine pre cut and pre soldered Litz wire from ESTRON.
In April 1999, after 3 years of discussion, and one some tests during the year 1998, FORMERS agreed to appoint us as their agent and representative for France and Germany. We built our web site in such a manner that all available FORMERS products are clearly shown on line and prospect over 500 coil winders in France and in Germany. The new models arouse finally the winding companies to try some business with us!
In may 2000, we added the French representation of ULVECO.
During 2001, we added special measurement instruments in which we developed some coils.
At the second half of 2002, we agreed for a limited distribution of nano crystalline toroids. This new material has very interesting qualities. 
We are also more and more asked for special magnetic cores (mainly high grade C-cores) and hard magnetic products (special magnets). We only intervene where and when really necessary, and leave the normal work to the established firms.
We sell TOKO components on special demand, mostly with end-of life products.
In December 2002 we had a new agreement with PACK FEINDRAEHTE for special Litz wire. PACK developed triple insulated wire based on extruded TEFZEL: RUPATEX
We changed our Nano crystal manufacturer in 2007 for better competition. In 2008 we delivered the first nano crystalline cut cores.
Today, we have a range of complementing products for the coil winding industry, and we do our best to keep business going in this part of the world.

ENGINEERING: "Fabless Manufacturer"
Since 2000, the ULVECO range of products came in adjonction to TransElectro.  All the toroidal referencies developed by us and made for us since 1986 under the Indel label are made by TransElectro or ULVECO,  and much more: special high grade toroidal transformers including transformer assemblies (front ends for mono and multiphase power supplies, often developed in close cooperation). We also develop and make special products including magnetic products together with other companies. Examples: electromagnets with electronic regulation; high current generators for resistance welding; remote umbilical power supplies for robots in the power range from 1kiloWatt and tending towards 100kiloWatts; special proximity sensors for harsh environments; regulated high voltage AC generators; programmable high power supplies up to 400VDC 300A; dielectric testers, megohm meters and differential mode oscilloscope probes

LOCATION
We moved from Montmagny to our new home office at SOISY in December 2002.
EVOLUTION
2005: Since the beginning of this year we had an incredible staff increase of 100%. We engaged Mrs Valérie Legrand to take over a good part of the administration and the follow up of our customer contacts.
2006: The decreasing order level forced us to separate us from Mrs Legrand at our great regret. She really did lots of good work for the company.
2007: Announces to be a turning point for GEKADE. The demand for triple insulated wire is steadily growing since the second half of 2006.
2008: The demand for own manufactured products increases constantly and the predicative adjective of "Fabless" will have to be removed. We now manufacture specific power supplies, regulated heating elements and annex products.
          We hope reaching the equilibrium again at last!
2009: The disappearance of the company Thuillier created big problems to us. Besides taking back the products we had engineered and made by them, we were forced to take over the complete technology of the tools and products for the lost wax casting industry. We are very busy with this, especially because most  of the old products have to be reengineered in the scope of present regulations such as RoHS, REACH, energy waste, end of life recycling and so on.
2010: A broken arm stopped our activity for half a year.
2011: The Investment casting line grows: new tools ready for production now. We reengineered a wax bath of the range 300*400mm : BCR300400.

  .

"All products mentioned are registered trademarks or trademarks of their respective companies"

Disclaimer:
The pages of GEKADE contain links to other Internet pages.
The following shall therefore apply to all such links: the GEKADE company hereby expressly states that it has no influence whatsoever on the design and content of the pages to which said links have been provided.
For this reason, GEKADE expressly disassociates itself from all content matter contained on any of the pages to which links are provided and refrains from adopting any of this content matter as its own.
The aforementioned statement shall apply to all the links displayed on the above page and to all the content matter contained on pages to which the visible links may lead.