GEKADE GKD GeKaDe Magnetic Components Accessories

Maintenance of original Thuillier parts, click here

1) 230V/50Hz mains power tools

BLADE WAX SHAPER IRONS

BWS (Blade Wax Shaper):
The new industrial heavy duty blade wax shaper.
The BWS series replaces Thuilliers' series FAL1.
The 18mm wide aluminum blade enables easy modeling of important works.
The central 4mm thickness conducts the heat all over the blade and gives good mechanical strength.
A short stainless steel barrel with 7x4 Ø3mm air holes efficiently prevents from overheating the handle.
The precision machined heating element holder of the shaft allows much better heat transfer and increases temperature stability of the blade.
The heating elements are mounted with special heat conductive compound to increase the power transfer to the blade and avoid overheating of the heating element.
The heating elements have much better shock resistance than the older models.
This iron has a standard non burning silicone mains cable (CAB_3x050_SIL), flexible and heat resistant up to 180°C continuous.
Comes with French 2P+T plug; other plugs on demand; "unplugged" delivery also possible.
This iron features combines a sturdy fabric, good security level and easy of maintenance.
On demand it will be equipped with heating elements from 40 to 125W (see table below).
For extreme heat and power, Blade #1 is also available in copper.

BWS with blade shape #1 (LAME N° 1)
The electronic version BWSE has been validated and can be delivered on order. It features large range pre settable temperature with heating-up boost and automatic power saver when not used after a period of 5 to 15 minutes, factory settable. The power saving level can be factory set at approx half power or nearly power off. As soon as the iron is touched again it starts heating up at full power until the set temperature is reached. The average lifetime of the heating element is greatly enlarged, combined with considerable energy saving. on order the standby power can be programmed below 2W procuring maximum energy saving, heating element lifetime and a cold iron when forgotten to switch off, but it takes more time to reach preset heat level.
The lower part has to be reconstructed, please refer to the French page for most recent update Les équipements
C_BWSLAME1	LAME forme N°1 en aluminium
C_BWSLAME1C	LAME forme N°1 en cuivre
C_BWSSPAT1	SPATULE forme N°1 en aluminium

SBWS (Small Blade Wax Shaper : petit modeleur de cire à lame) équipé du profil LAME N° 2. élément de puissance standard 50W. Liste des éléments possibles. le fer SBWS (Small Blade Wax Shaper) est un fer à lame léger et maniable, sa manche de forme triangulaire permettant de retrouver facilement les angles de travail. SBWSB Cet assemblage d'un manche SBWS, un canon long et une lame BWSLAME1 ou BWSSPAT1 permet d'atteindre des points éloignés dans de grandes structures. Le grand porte à faux ne lui autorise pas des efforts soutenus. Liste des éléments chauffants disponibles.